NSTL国家科技图书文献中心

1. Experimental investigation of isothermal section in the La-Ni-Si system at 1073 K NSTL国家科技图书文献中心

Zhang, Tianlei | Wang, Kai ... - 《Intermetallics》 - 2025,179 - 108671～ - 共9页

摘要：The isothermal* section of the La-Ni-Si ternary* | isothermal section also consists of 44 + 6 three-phase | confirmed in the isothermal* sections at 1073 K: LaNi11.6* | system at 1073 K has been constructed in this work by | using X-ray diffraction (XRD), and back-scattered

关键词： La-Ni-Si alloy | Phase diagram | X-ray diffraction

2. Phase equilibria of CaO-Al 2 O 3 -Ti 2 O 3 system at 1500°C and 1600 ° C in C/ CO equilibrium atmosphere NSTL国家科技图书文献中心

Qiu, Jiyu | Li, Wenjie ... - 《Journal of Non-Crystalline Solids》 - 2025,648 - 共15页

摘要： diffraction (XRD). The isothermal* section of CaO-Al2O3-Ti2O3* | liquid phase field. The isothermal* section of CaO-Al2O3* | The phase diagram of CaO-Al2O3-Ti2O3 system | has significant implications for the metallurgical | slag design of Al- Ti alloy steel. In this work, the

关键词： Ti-bearing slag | CaO-Al2O3-Ti2O3 | Phase equilibria | Isothermal section

3. Experimental determination of the Phase Equilibrium of CaO-Ce2O3-SiO2-(5-25 wt%) Al2O3 System at 1873K NSTL国家科技图书文献中心

Li, Mengchuan | Zhang, Tongsheng ... - 《CERAMICS INTERNATIONAL》 - 2025,51(8) - 9842～9851 - 共10页

摘要： to 25 wt%, the isothermal* cross-section diagram* | , leading to the construction of isothermal* sections. For* | the CaOCe2O3-SiO2-5 wt% Al2O3 system, the isothermal | cross-section* diagram revealed a liquid phase region* | The thermodynamic data of rare earth

关键词： Phase equilibrium | Isothermal section diagram | High-temperature equilibrium

4. Phase Equilibria in the V-Rich Region of the V-Si-B System at 1400 °C NSTL国家科技图书文献中心

Yang, Weiguang | Hasemann, Georg ... - 《Journal of Phase Equilibria and Diffusion》 - 2025,46(1) - 151～169 - 共19页

摘要： spectroscopy and x-ray diffraction. The isothermal* section at* | determined isothermal* section can be applied to the design* | The phase equilibria in the V-rich region of | the V-Si-B system, including the V8SiB4 phase, have | been experimentally investigated. Eleven alloys with

关键词： energy dispersive spectrometry (EDS) | experimental phase equilibria | isothermal section | metallic alloys | ternary phase diagram | x-ray analysis

5. Phase Equilibria in the Tm-Co, Tm-Fe and Tm-Co-Fe Systems NSTL国家科技图书文献中心

Fartushna, I. | Kapush, D.... - 《Journal of Phase Equilibria and Diffusion》 - 2025,46(1) - 100～118 - 共19页

摘要： projections, isothermal* sections at 1200 and 1000 degrees C* | . Isothermal* sections differ from the solidus projection by* | Phase diagrams of the ternary Tm-Co-Fe and | boundary binary systems Tm-Co and Tm-Fe were constructed | in the entire composition ranges using differential

关键词： isothermal section | liquidus surface | solidus surface | Tm-Co | Tm-Co-Fe | Tm-Fe

6. Phase equilibria in the Y-B and Y-Fe-B systems NSTL国家科技图书文献中心

Qiu, Chengliang | Liu, Shuhong ... - 《Intermetallics》 - 2025,177 - 108588～ - 共11页 - 被引量：1

摘要：Phase diagram of the Y-B system and isothermal | stoichiometric compound at 1000 degrees C. For the isothermal | section of the Y-Fe-B system at 600 degrees C, five | (t1-t6) and 18 three-phase regions in the isothermal | section at 800 degrees C. Ternary phases were measured

关键词： Y-B | Phase equilibria | Isothermal sections | Ternary compounds | Y-Fe-B

7. Analysis of the impact of isothermal hardening on the mechanical properties and abrasion resistance of welded joints on Hardox Extreme steel NSTL国家科技图书文献中心

Zemlik, Martyna | Konat, Lukasz ... - 《Welding in the World》 - 2025,69(3) - 793～812 - 共20页

摘要： thermal treatments involving isothermal* hardening in* | separate section* was dedicated to characterizing abrasion* | the case of isothermal* hardening, the factor* | The object of the research reported in this | study was a welded joint of Hardox Extreme steel, made

关键词： Hardox Extreme | SAW welding | Microstructure | Isothermal hardening | Mechanical properties | Abrasive wear

8. Shrinkage and deformation of material extrusion 3D printed parts during sintering: Numerical simulation and experimental validation NSTL国家科技图书文献中心

Ghantasala, Sri Bhar... | Singh, Gurminder ... - 《Acta materialia》 - 2025,282 - 120518～ - 共16页

摘要： with an isothermal* stairway heating cycle in a* | long isothermal* heating cycles at 850, 900, 950, 1000* | geometries, cube and overhanging I section, were used to | Material extrusion 3D printing (ME3DP | ) combined with sintering is a low-cost additive

关键词： Sintering | Material extrusion 3D printing | Copper | Constitutive equation | Deformation

9. Thermodynamic Assessment of the U-Ti-Zr System and Atomic Mobility of Its bcc Phase NSTL国家科技图书文献中心

Qu, Zhehao | Liu, Zhenzhi ... - 《Journal of Phase Equilibria and Diffusion》 - 2025,46(1) - 49～58 - 共10页

摘要：, and Ti-Zr binary systems. The calculated isothermal | sections and vertical section* of the U-Ti-Zr system are* | In the present work, the thermodynamic | assessment of the U-Ti-Zr ternary system was performed by | using the CALPHAD (Calculation of Phase Diagrams

关键词： bcc phase | CALPHAD | diffusion mobility | thermodynamic assessment | U-Ti-Zr alloys

10. An investigation of reduced cutting tool life in the machining of a 16MnCrS5 steel piston used in a door closer NSTL国家科技图书文献中心

Yun Hang | Xuan Wu ... - 《Engineering failure analysis》 - 2025,170 - 109308～ - 共14页

摘要： variations along the piston section. This produced | transformation mechanisms of granular bainite, an isothermal | The tools used for the milling and drilling of | a door-closer piston repeatedly broke down well | before their design life of 500 units. The pistons were

摘要：The isothermal* section of the La-Ni-Si ternary* | isothermal section also consists of 44 + 6 three-phase | confirmed in the isothermal* sections at 1073 K: LaNi11.6* | system at 1073 K has been constructed in this work by | using X-ray diffraction (XRD), and back-scattered

关键词： La-Ni-Si alloy | Phase diagram | X-ray diffraction

摘要： diffraction (XRD). The isothermal* section of CaO-Al2O3-Ti2O3* | liquid phase field. The isothermal* section of CaO-Al2O3* | The phase diagram of CaO-Al2O3-Ti2O3 system | has significant implications for the metallurgical | slag design of Al- Ti alloy steel. In this work, the

关键词： Ti-bearing slag | CaO-Al2O3-Ti2O3 | Phase equilibria | Isothermal section

摘要： to 25 wt%, the isothermal* cross-section diagram* | , leading to the construction of isothermal* sections. For* | the CaOCe2O3-SiO2-5 wt% Al2O3 system, the isothermal | cross-section* diagram revealed a liquid phase region* | The thermodynamic data of rare earth

关键词： Phase equilibrium | Isothermal section diagram | High-temperature equilibrium

摘要： spectroscopy and x-ray diffraction. The isothermal* section at* | determined isothermal* section can be applied to the design* | The phase equilibria in the V-rich region of | the V-Si-B system, including the V8SiB4 phase, have | been experimentally investigated. Eleven alloys with

关键词： energy dispersive spectrometry (EDS) | experimental phase equilibria | isothermal section | metallic alloys | ternary phase diagram | x-ray analysis

摘要： projections, isothermal* sections at 1200 and 1000 degrees C* | . Isothermal* sections differ from the solidus projection by* | Phase diagrams of the ternary Tm-Co-Fe and | boundary binary systems Tm-Co and Tm-Fe were constructed | in the entire composition ranges using differential

关键词： isothermal section | liquidus surface | solidus surface | Tm-Co | Tm-Co-Fe | Tm-Fe

摘要：Phase diagram of the Y-B system and isothermal | stoichiometric compound at 1000 degrees C. For the isothermal | section of the Y-Fe-B system at 600 degrees C, five | (t1-t6) and 18 three-phase regions in the isothermal | section at 800 degrees C. Ternary phases were measured

关键词： Y-B | Phase equilibria | Isothermal sections | Ternary compounds | Y-Fe-B

摘要： thermal treatments involving isothermal* hardening in* | separate section* was dedicated to characterizing abrasion* | the case of isothermal* hardening, the factor* | The object of the research reported in this | study was a welded joint of Hardox Extreme steel, made

关键词： Hardox Extreme | SAW welding | Microstructure | Isothermal hardening | Mechanical properties | Abrasive wear

摘要： with an isothermal* stairway heating cycle in a* | long isothermal* heating cycles at 850, 900, 950, 1000* | geometries, cube and overhanging I section, were used to | Material extrusion 3D printing (ME3DP | ) combined with sintering is a low-cost additive

关键词： Sintering | Material extrusion 3D printing | Copper | Constitutive equation | Deformation

摘要：, and Ti-Zr binary systems. The calculated isothermal | sections and vertical section* of the U-Ti-Zr system are* | In the present work, the thermodynamic | assessment of the U-Ti-Zr ternary system was performed by | using the CALPHAD (Calculation of Phase Diagrams

关键词： bcc phase | CALPHAD | diffusion mobility | thermodynamic assessment | U-Ti-Zr alloys

摘要： variations along the piston section. This produced | transformation mechanisms of granular bainite, an isothermal | The tools used for the milling and drilling of | a door-closer piston repeatedly broke down well | before their design life of 500 units. The pistons were

关键词： Piston of door closer | Cutting tool failures | Granular bainite | Isothermal normalization | Microhardness distribution | Continuous air cooling

4008-161-200 800-990-8900

国家科技图书文献中心

摘要：The isothermal section of the La-Ni-Si ternary | isothermal section also consists of 44 + 6 three-phase | confirmed in the isothermal sections at 1073 K: LaNi11.6 | system at 1073 K has been constructed in this work by | using X-ray diffraction (XRD), and back-scattered

关键词： La-Ni-Si alloy | Phase diagram | X-ray diffraction

摘要： diffraction (XRD). The isothermal section of CaO-Al2O3-Ti2O3 | liquid phase field. The isothermal section of CaO-Al2O3 | The phase diagram of CaO-Al2O3-Ti2O3 system | has significant implications for the metallurgical | slag design of Al- Ti alloy steel. In this work, the

关键词： Ti-bearing slag | CaO-Al2O3-Ti2O3 | Phase equilibria | Isothermal section

摘要： to 25 wt%, the isothermal cross-section diagram | , leading to the construction of isothermal sections. For | the CaOCe2O3-SiO2-5 wt% Al2O3 system, the isothermal | cross-section diagram revealed a liquid phase region | The thermodynamic data of rare earth

关键词： Phase equilibrium | Isothermal section diagram | High-temperature equilibrium

摘要： spectroscopy and x-ray diffraction. The isothermal section at | determined isothermal section can be applied to the design | The phase equilibria in the V-rich region of | the V-Si-B system, including the V8SiB4 phase, have | been experimentally investigated. Eleven alloys with

关键词： energy dispersive spectrometry (EDS) | experimental phase equilibria | isothermal section | metallic alloys | ternary phase diagram | x-ray analysis

摘要： projections, isothermal sections at 1200 and 1000 degrees C | . Isothermal sections differ from the solidus projection by | Phase diagrams of the ternary Tm-Co-Fe and | boundary binary systems Tm-Co and Tm-Fe were constructed | in the entire composition ranges using differential

关键词： isothermal section | liquidus surface | solidus surface | Tm-Co | Tm-Co-Fe | Tm-Fe

摘要：Phase diagram of the Y-B system and isothermal | stoichiometric compound at 1000 degrees C. For the isothermal | section of the Y-Fe-B system at 600 degrees C, five | (t1-t6) and 18 three-phase regions in the isothermal | section at 800 degrees C. Ternary phases were measured

关键词： Y-B | Phase equilibria | Isothermal sections | Ternary compounds | Y-Fe-B

摘要： thermal treatments involving isothermal hardening in | separate section was dedicated to characterizing abrasion | the case of isothermal hardening, the factor | The object of the research reported in this | study was a welded joint of Hardox Extreme steel, made

关键词： Hardox Extreme | SAW welding | Microstructure | Isothermal hardening | Mechanical properties | Abrasive wear

摘要： with an isothermal stairway heating cycle in a | long isothermal heating cycles at 850, 900, 950, 1000 | geometries, cube and overhanging I section, were used to | Material extrusion 3D printing (ME3DP | ) combined with sintering is a low-cost additive

关键词： Sintering | Material extrusion 3D printing | Copper | Constitutive equation | Deformation

摘要：, and Ti-Zr binary systems. The calculated isothermal | sections and vertical section of the U-Ti-Zr system are | In the present work, the thermodynamic | assessment of the U-Ti-Zr ternary system was performed by | using the CALPHAD (Calculation of Phase Diagrams

关键词： bcc phase | CALPHAD | diffusion mobility | thermodynamic assessment | U-Ti-Zr alloys

摘要： variations along the piston section. This produced | transformation mechanisms of granular bainite, an isothermal | The tools used for the milling and drilling of | a door-closer piston repeatedly broke down well | before their design life of 500 units. The pistons were

关键词： Piston of door closer | Cutting tool failures | Granular bainite | Isothermal normalization | Microhardness distribution | Continuous air cooling

4008-161-200 800-990-8900

国家科技图书文献中心

摘要：The isothermal* section of the La-Ni-Si ternary* | isothermal section also consists of 44 + 6 three-phase | confirmed in the isothermal* sections at 1073 K: LaNi11.6* | system at 1073 K has been constructed in this work by | using X-ray diffraction (XRD), and back-scattered

摘要： diffraction (XRD). The isothermal* section of CaO-Al2O3-Ti2O3* | liquid phase field. The isothermal* section of CaO-Al2O3* | The phase diagram of CaO-Al2O3-Ti2O3 system | has significant implications for the metallurgical | slag design of Al- Ti alloy steel. In this work, the

摘要： to 25 wt%, the isothermal* cross-section diagram* | , leading to the construction of isothermal* sections. For* | the CaOCe2O3-SiO2-5 wt% Al2O3 system, the isothermal | cross-section* diagram revealed a liquid phase region* | The thermodynamic data of rare earth

摘要： spectroscopy and x-ray diffraction. The isothermal* section at* | determined isothermal* section can be applied to the design* | The phase equilibria in the V-rich region of | the V-Si-B system, including the V8SiB4 phase, have | been experimentally investigated. Eleven alloys with

摘要： projections, isothermal* sections at 1200 and 1000 degrees C* | . Isothermal* sections differ from the solidus projection by* | Phase diagrams of the ternary Tm-Co-Fe and | boundary binary systems Tm-Co and Tm-Fe were constructed | in the entire composition ranges using differential

摘要： thermal treatments involving isothermal* hardening in* | separate section* was dedicated to characterizing abrasion* | the case of isothermal* hardening, the factor* | The object of the research reported in this | study was a welded joint of Hardox Extreme steel, made

摘要： with an isothermal* stairway heating cycle in a* | long isothermal* heating cycles at 850, 900, 950, 1000* | geometries, cube and overhanging I section, were used to | Material extrusion 3D printing (ME3DP | ) combined with sintering is a low-cost additive

摘要：, and Ti-Zr binary systems. The calculated isothermal | sections and vertical section* of the U-Ti-Zr system are* | In the present work, the thermodynamic | assessment of the U-Ti-Zr ternary system was performed by | using the CALPHAD (Calculation of Phase Diagrams