全部 |
  • 全部
  • 题名
  • 作者
  • 机构
  • 关键词
  • NSTL主题词
  • 摘要
检索 二次检索 AI检索
外文文献 中文文献
筛选条件:

1. Regulating heat-induced fibrous whey protein-wheat starch composite emulsion gels as dysphagia food by preheating temperature: Insights from protein-starch interactions NSTL国家科技图书文献中心

Wang Z. |  Zeng J.... -  《Food hydrocolloids》 - 2025,159(Feb.) - 1.1~1.12 - 共12页

摘要:, but the mechanism by which preheating temperature |  preheating temperature synchronously regulated the texture |  preheating temperature is below 60 °C, two-step heated CEGs |  with high preheating temperature (>60 °C) is | , carbohydrates and lipids, the effects of preheating
关键词: Gel network structure |  IDDSI test |  Protein aggregates |  Starch digestibility |  Texture-modified

2. Microstructure, wear and corrosion resistance of NiTi coatings synthesized in situ on Ti6Al4V by directed energy deposition with different preheating temperature NSTL国家科技图书文献中心

Wang, Shuyao |  Shi, Yongjun... -  《Journal of Alloys and Compounds》 - 2025,1026 - 180521~ - 共15页

摘要: preheating temperature on the phase composition | . The increase in preheating temperature reduces the |  0.441 at 300 degrees C. As the preheating temperature |  different preheating temperatures (26, 100, 200, and 300 |  kinetically lower corrosion rates as the preheating
关键词: Directed energy deposition |  In-situ synthesis |  NiTi alloy coating |  Wear resistance |  Corrosion resistance

3. Experimental study on the low-temperature preheating performance of positive-temperature-coefficient heating film in the prismatic power battery module NSTL国家科技图书文献中心

Zhang, Jiangyun |  Hu, Ruiqi... -  《Applied thermal engineering》 - 2025,258(Pt.C) - 共18页

摘要:-ion batteries under low temperature condition, this | -temperature-coefficient (PTC) heating film on the heating |  testing the heating time and temperature consistency | . Second, for the battery module, a low-temperature |  temperature difference is 1.885 degrees C lower. For battery
关键词: Low temperature preheating |  Thermal management |  Thermal safety |  PTC heating film |  Power batteries

4. Preheating intensity affects the properties of age gelation formed in direct ultra-high-temperature skim milk NSTL国家科技图书文献中心

Liu X. |  Gong H.... -  《International Dairy Journal》 - 2025,160 - 1~11 - 共11页

摘要:© 2024A preheating treatment before direct |  ultra-high-temperature (dUHT) treatment may delay age |  optimum preheating intensity, the plasmin activities and |  preheating intensities (80–95 °C for 30 s or 60 s) were |  investigated during six-month storage at room temperature (25
关键词: Age gelation |  dUHT skim milk |  Molecular docking |  Plasmin |  Preheating intensity |  Protein hydrolysis

5. Mechanical behaviours of the hierarchical microstructure of PBF-LB/M 316L SS during high cycle fatigue NSTL国家科技图书文献中心

Xuemei Lyu |  Jiali Zhang... -  《Materials Science & Engineering,A.Structural Materials: Properties, Misrostructure and Processing》 - 2025,922(Feb.) - 147652.1~147652.16 - 共16页

摘要: preheating temperatures of the building platform, namely | A thorough understanding of the relations |  between the processing parameters, microstructures, and |  fatigue performances is essential for applying Laser |  Powder Bed Fusion (PBF-LB/M) 316L stainless steel (SS
关键词: PBF-LB/M 316L SS |  High cycle fatigue |  Hierarchical microstructure |  Cellular structure |  Preheating temperature

6. Experimental study on laser-assisted machining of SiCp/Al composites considering laser preheating history based on in-situ observation NSTL国家科技图书文献中心

Zhang, Hang |  Cui, Feijie... -  《Optics & Laser Technology》 - 2025,181(Pt.B) - 共12页 - 被引量:1

摘要: changes in peak temperature and instantaneous preheating |  and instantaneous preheating temperature. It has |  temperature dominated by the instantaneous preheating |  laser preheating affects the deformation mechanism of |  materials. In this paper, the laser preheating history
关键词: SiCp/Al composites |  Laser-assisted machining (LAM) |  Laser preheating history |  Cutting process |  Surface integrity

7. Modelling and Simulation of Solidification Time in Casting NSTL国家科技图书文献中心

Samir Chakravarti |  Swarnendu Sen -  《Advances in Thermo-Fluid Engineering》 -  International Conference on Mechanical Engineering - 2025, - 561~570 - 共10页

摘要: and mould preheating temperature on solidification |  preheating temperature for shorter solidification times |  parameters like pouring temperature, velocity of pouring |  increasing pouring temperature and shorter times with |  combinations of pouring temperature and velocity and mould
关键词: Solidification time |  Computational fluid dynamics |  Casting

8. Microstructure and tribological properties of FeCrNi-WC medium entropy alloy composite coatings prepared by high-speed laser cladding with different preheating temperatures NSTL国家科技图书文献中心

Ren, Zhiying |  Wang, Xin... -  《Surface & Coatings Technology》 - 2025,504 - 共16页

摘要: the coatings. As the preheating temperature |  preheating temperature of 300 degrees C, FeCrNi-WC medium |  different temperatures (room temperature, 200 degrees C |  Cr23C6, and the change in substrate preheating |  temperature did not affect the primary phase structure of
关键词: High-speed laser cladding |  Medium entropy alloy |  Composite coatings |  Tribolayer |  Wear resistance

9. Optimization for furnace-assisted laser cladding process parameter of crack-free ceramic-based coating by response surface methodology NSTL国家科技图书文献中心

Zhao Yong |  Yunfei Wang... -  《CERAMICS INTERNATIONAL》 - 2025,51(9) - 11735~11746 - 共12页

摘要: and preheating temperature is of the utmost |  laser scanning speed, 400 deg C preheating temperature |  such as wear resistance, high-temperature tolerance | , scanning rate, powder feeding rate, and preheating |  temperature on coating height, dilution rate and micro
关键词: Furnace-assisted |  Laser cladding |  Ceramic-based coating |  Response surface methodology

10. Study on the formation mechanism of HAZ microcracks in FB2 heat-resistant steel by laser cladding NSTL国家科技图书文献中心

Rong, Chuman |  Liu, Xia... -  《Materials Characterization》 - 2025,221 - 114750~ - 共12页

摘要: preheating temperature of 473 K, the average crack length |  cooling process. Increasing the preheating temperature |  and crack formation under different preheating |  heat-affected zone (HAZ). From no preheating to a |  process, M23C6 and BN dissolved when the temperature
关键词: Laser cladding |  HAZ microcracks |  Formation mechanism |  Boron nitride |  Precipitates
检索条件Preheating temperature
  • 检索词扩展

NSTL主题词

  • NSTL学科导航