NSTL国家科技图书文献中心

1. Limitations of earthquake coseismic deformation measurements using InSAR NSTL国家科技图书文献中心

Shangzong Lu | Cunren Liang ... - 《International journal of remote sensing》 - 2025,46(5/6) - 2212～2232 - 共21页

摘要： coseismic deformation. However, InSAR cannot be used to | effectively measure all types of coseismic deformation, and | , for the limitations of InSAR coseismic deformation | . To determine the limits of coseismic deformation | coseismic deformation* simulations and fault parameter*

关键词： InSAR | earthquake | deformation measurement sensitivity | screen earthquake catalogs | coseismic deformation

2. Compressive Deformation of 3D-Printed CrMnFeCoNi Alloy NSTL国家科技图书文献中心

D. Bajaj | D. L. Chen ... - 《Proceedings of the 63rd Conference of Metallurgists,vol.1》 - Conference of Metallurgists - 2025, - 15～17 - 共3页

摘要： powder metallurgy but also alters the deformation | , the compressive deformation* behavior of CrMnFeCoNi* | activation of different deformation* mechanisms was* | observed along with the activation of deformation | The scientific interest towards additive

关键词： CrMnFeCoNi alloy | Deformation micro structure | Electron backscatter diffraction (EBSD) | Twinning

3. Macro-micro deformation behaviors of stable deformation zone under LCR process for AZ31B magnesium alloy NSTL国家科技图书文献中心

Liu, Jianglin | Li, Xijie ... - 《Journal of Alloys and Compounds》 - 2025,1020 - 179268～ - 共15页

摘要：Specimens in the stable deformation* zone of a* | deformation behavior of the stable deformation zone for LCR | , while the introduced bending deformation* changes the* | deformation exhibits a high average Schmidt factor, which | novel longitudinal corrugated rolling (LCR) process

关键词： AZ31B magnesium alloy | Sheet | Longitudinal corrugated rolling (LCR) | Macro-micro deformation behavior

4. Characteristic deformation microstructure evolution and deformation mechanisms in face-centered cubic high/medium entropy alloys NSTL国家科技图书文献中心

Yoshida, Shuhei | Fu, Rui ... - 《Acta materialia》 - 2025,283 - 120498～ - 共15页

摘要： still elusive. Here, we report the deformation | Co60Ni40 alloy. Deformation* microstructures in the* | a few deformation* twins (DTs) in grains with the* | developed three distinct deformation* microstructures* | -situ X-ray diffraction during tensile deformation

关键词： High/medium entropy alloys | Dislocation structure | Deformation twinning | Strain hardening | 3D characterization

5. The role of interaction work in martensite deformation NSTL国家科技图书文献中心

Xiao, J. F. | Cayron, C. - 《Scripta materialia》 - 2025,256 - 116433～ - 共7页

摘要： martensite deformation* via Interaction Work (IW). The IW is* | , assisting deformation* by competing with the energy barrier* | ) criterion for variant selection of different deformation | modes. Considering multiple deformation* modes (A, B* | , ...), the deformation* mode with min{IWAmax, IWBmax*

关键词： Martensitic deformation | Interaction work (IW)

6. Reconfigurable lattice structures with programmable deformation modes under electrothermal actuation NSTL国家科技图书文献中心

Zhang, Kai | Ji, Jinyu ... - 《International Journal of Mechanical Sciences》 - 2025,293 - 共19页

摘要： deformation behaviors present significant promise in fields | primarily on designing some basic deformation* modes for* | , expansion and simple shear deformation* modes), which* | deformation modes in the reconfigurable structures. This | programmable deformation* modes under electrothermal actuation*

关键词： Lattice composite structures | Reconfigurable structures | Finite deformation | Programmable deformation modes | Electrothermal actuation

7. Deformation Field Fusion for Medical Image Registration NSTL国家科技图书文献中心

HAIFENG ZHAO | CHI ZHANG ... - 《ACM transactions on multimedia computing communications and applications》 - 2025,21(3) - 94.1～94.17 - 共17页

摘要： obtain the deformation* field which is specialized in* | deformation field only or multi-stage (multi-level | ) deformation* fields progressively arriving at a final optimal* | field. Actually, deformation* fields resulting from* | of fusing different deformation* fields to acquire*

关键词： Brain MRI | Medical Image Registration | Deformation Field Fusion | Contrast-Structural Similarity Loss

8. Tensile deformation characteristic and SASH modeling of Superni 625 alloy: Synergistic effects of grain size, ageing time, and deformation micromechanisms NSTL国家科技图书文献中心

Chahar, Sonika | Mula, Suhrit - 《Journal of Alloys and Compounds》 - 2025,1017 - 179113～ - 共18页

摘要： up to 1500 h) and deformation* micromechanisms of* | plastic deformation* caused by its low stacking fault* | consequent localization of plastic deformation. A physics | single to multiple slips during plastic deformation | , which is accomplished through analysis of deformation

关键词： Homogenized cast alloy Superni 625 | Deformation micromechanisms | Plastic deformation | SASH model | Micro-twinning in precipitate shearing | Electron microscopy

9. Nano-thick surface-modified layer governs bending deformation of micrographite NSTL国家科技图书文献中心

Matsunaga, Wataru | Kajiyama, Kiyohiko ... - 《Carbon》 - 2025,231 - 共15页

摘要： surface-modified layer (SML) on the bending deformation | and approximately 5 nm exhibited shear deformation | no interlayer slip, with bending deformation | nonlinear deformation* also increased with thicker SML* | slip and significantly enhanced the deformation

关键词： Bending deformation | Shear deformation | vdW-stacked materials | HOPG | Surface-modified layer

10. Goto's deformation theory of geometric structures, a Lie-theoretical description NSTL国家科技图书文献中心

Papayanov, Grigory - 《Journal of geometry and physics》 - 2025,210 - 共11页

摘要：Ryushi Goto has constructed the deformation | )- structures) this deformation* space is smooth. This result* | that this deformation* space could be obtained as the* | deformation space associated to a certain dg Lie algebra. We | theorems about unobstructedness of deformations. We show

摘要： coseismic deformation. However, InSAR cannot be used to | effectively measure all types of coseismic deformation, and | , for the limitations of InSAR coseismic deformation | . To determine the limits of coseismic deformation | coseismic deformation* simulations and fault parameter*

关键词： InSAR | earthquake | deformation measurement sensitivity | screen earthquake catalogs | coseismic deformation

摘要： powder metallurgy but also alters the deformation | , the compressive deformation* behavior of CrMnFeCoNi* | activation of different deformation* mechanisms was* | observed along with the activation of deformation | The scientific interest towards additive

关键词： CrMnFeCoNi alloy | Deformation micro structure | Electron backscatter diffraction (EBSD) | Twinning

摘要：Specimens in the stable deformation* zone of a* | deformation behavior of the stable deformation zone for LCR | , while the introduced bending deformation* changes the* | deformation exhibits a high average Schmidt factor, which | novel longitudinal corrugated rolling (LCR) process

关键词： AZ31B magnesium alloy | Sheet | Longitudinal corrugated rolling (LCR) | Macro-micro deformation behavior

摘要： still elusive. Here, we report the deformation | Co60Ni40 alloy. Deformation* microstructures in the* | a few deformation* twins (DTs) in grains with the* | developed three distinct deformation* microstructures* | -situ X-ray diffraction during tensile deformation

关键词： High/medium entropy alloys | Dislocation structure | Deformation twinning | Strain hardening | 3D characterization

关键词： Martensitic deformation | Interaction work (IW)

关键词： Lattice composite structures | Reconfigurable structures | Finite deformation | Programmable deformation modes | Electrothermal actuation

摘要： obtain the deformation* field which is specialized in* | deformation field only or multi-stage (multi-level | ) deformation* fields progressively arriving at a final optimal* | field. Actually, deformation* fields resulting from* | of fusing different deformation* fields to acquire*

关键词： Brain MRI | Medical Image Registration | Deformation Field Fusion | Contrast-Structural Similarity Loss

摘要： up to 1500 h) and deformation* micromechanisms of* | plastic deformation* caused by its low stacking fault* | consequent localization of plastic deformation. A physics | single to multiple slips during plastic deformation | , which is accomplished through analysis of deformation

关键词： Homogenized cast alloy Superni 625 | Deformation micromechanisms | Plastic deformation | SASH model | Micro-twinning in precipitate shearing | Electron microscopy

摘要： surface-modified layer (SML) on the bending deformation | and approximately 5 nm exhibited shear deformation | no interlayer slip, with bending deformation | nonlinear deformation* also increased with thicker SML* | slip and significantly enhanced the deformation

关键词： Bending deformation | Shear deformation | vdW-stacked materials | HOPG | Surface-modified layer

摘要：Ryushi Goto has constructed the deformation | )- structures) this deformation* space is smooth. This result* | that this deformation* space could be obtained as the* | deformation space associated to a certain dg Lie algebra. We | theorems about unobstructedness of deformations. We show

关键词： Special holonomy | Deformation theory | dg Lie algebra

4008-161-200 800-990-8900

国家科技图书文献中心

摘要： coseismic deformation. However, InSAR cannot be used to | effectively measure all types of coseismic deformation, and | , for the limitations of InSAR coseismic deformation | . To determine the limits of coseismic deformation | coseismic deformation simulations and fault parameter

关键词： InSAR | earthquake | deformation measurement sensitivity | screen earthquake catalogs | coseismic deformation

摘要： powder metallurgy but also alters the deformation | , the compressive deformation behavior of CrMnFeCoNi | activation of different deformation mechanisms was | observed along with the activation of deformation | The scientific interest towards additive

关键词： CrMnFeCoNi alloy | Deformation micro structure | Electron backscatter diffraction (EBSD) | Twinning

摘要：Specimens in the stable deformation zone of a | deformation behavior of the stable deformation zone for LCR | , while the introduced bending deformation changes the | deformation exhibits a high average Schmidt factor, which | novel longitudinal corrugated rolling (LCR) process

关键词： AZ31B magnesium alloy | Sheet | Longitudinal corrugated rolling (LCR) | Macro-micro deformation behavior

摘要： still elusive. Here, we report the deformation | Co60Ni40 alloy. Deformation microstructures in the | a few deformation twins (DTs) in grains with the | developed three distinct deformation microstructures | -situ X-ray diffraction during tensile deformation

关键词： High/medium entropy alloys | Dislocation structure | Deformation twinning | Strain hardening | 3D characterization

关键词： Martensitic deformation | Interaction work (IW)

关键词： Lattice composite structures | Reconfigurable structures | Finite deformation | Programmable deformation modes | Electrothermal actuation

摘要： obtain the deformation field which is specialized in | deformation field only or multi-stage (multi-level | ) deformation fields progressively arriving at a final optimal | field. Actually, deformation fields resulting from | of fusing different deformation fields to acquire

关键词： Brain MRI | Medical Image Registration | Deformation Field Fusion | Contrast-Structural Similarity Loss

摘要： up to 1500 h) and deformation micromechanisms of | plastic deformation caused by its low stacking fault | consequent localization of plastic deformation. A physics | single to multiple slips during plastic deformation | , which is accomplished through analysis of deformation

关键词： Homogenized cast alloy Superni 625 | Deformation micromechanisms | Plastic deformation | SASH model | Micro-twinning in precipitate shearing | Electron microscopy

摘要： surface-modified layer (SML) on the bending deformation | and approximately 5 nm exhibited shear deformation | no interlayer slip, with bending deformation | nonlinear deformation also increased with thicker SML | slip and significantly enhanced the deformation

关键词： Bending deformation | Shear deformation | vdW-stacked materials | HOPG | Surface-modified layer

摘要：Ryushi Goto has constructed the deformation | )- structures) this deformation space is smooth. This result | that this deformation space could be obtained as the | deformation space associated to a certain dg Lie algebra. We | theorems about unobstructedness of deformations. We show

关键词： Special holonomy | Deformation theory | dg Lie algebra

4008-161-200 800-990-8900

国家科技图书文献中心

摘要： coseismic deformation. However, InSAR cannot be used to | effectively measure all types of coseismic deformation, and | , for the limitations of InSAR coseismic deformation | . To determine the limits of coseismic deformation | coseismic deformation* simulations and fault parameter*

摘要： powder metallurgy but also alters the deformation | , the compressive deformation* behavior of CrMnFeCoNi* | activation of different deformation* mechanisms was* | observed along with the activation of deformation | The scientific interest towards additive

摘要：Specimens in the stable deformation* zone of a* | deformation behavior of the stable deformation zone for LCR | , while the introduced bending deformation* changes the* | deformation exhibits a high average Schmidt factor, which | novel longitudinal corrugated rolling (LCR) process

摘要： still elusive. Here, we report the deformation | Co60Ni40 alloy. Deformation* microstructures in the* | a few deformation* twins (DTs) in grains with the* | developed three distinct deformation* microstructures* | -situ X-ray diffraction during tensile deformation

摘要： obtain the deformation* field which is specialized in* | deformation field only or multi-stage (multi-level | ) deformation* fields progressively arriving at a final optimal* | field. Actually, deformation* fields resulting from* | of fusing different deformation* fields to acquire*

摘要： up to 1500 h) and deformation* micromechanisms of* | plastic deformation* caused by its low stacking fault* | consequent localization of plastic deformation. A physics | single to multiple slips during plastic deformation | , which is accomplished through analysis of deformation

摘要： surface-modified layer (SML) on the bending deformation | and approximately 5 nm exhibited shear deformation | no interlayer slip, with bending deformation | nonlinear deformation* also increased with thicker SML* | slip and significantly enhanced the deformation

摘要：Ryushi Goto has constructed the deformation | )- structures) this deformation* space is smooth. This result* | that this deformation* space could be obtained as the* | deformation space associated to a certain dg Lie algebra. We | theorems about unobstructedness of deformations. We show